Product Category: Mic Preamps
JoeMeek SixQ British Channel Preamp/EQ/Compressor (Open Box)


|
Original Price: $649.99
You save 39%
Sale Price: $399.00
Refurbished
Status: Only 1 Available
Found a lower price? Let us beat it!
Click here for details
|
| |
|
The Joemeek sixQ packs a wealth of features into a single rack space studio channel.
A single channel mic pre, based on our high quality Burr-Brown IC, three bands of highly musical EQ, and (of course) our signature optical compressor make for a highly capable recording instrument. Speaking of instruments, there's even an instrument level input on the front panel!
Output either analog or digitally directly to your sound card or DAW for a warm, musical analog sound - just what you've been looking for!


Take two and call me in the morning! - EQ Magazine
"The best application for this channel strip would be in any pro studio as another alternate to your board pres or in the home-based project studio for a very fancy, all in one, quality overdubbing interface. This would surely improve the sound of even line-in keyboards. The compressor is very stylized and will take some getting used to, but the EQ will make your life much easier."
* Input impedances: Mic: 1.2kohm; Line: 20kohm * Pre-amp overall gain: 10dB to 60dB (variable) * Common mode rejection: 70dB * Equivalent input noise: -128.5dBu (unweighted) * Distortion: 0.001% (below Compressor threshold) * Frequency response: 15Hz to 70kHz (-3dB) * Maximum input before clipping: Mic: +21dBu; Line: +45dBu * Headroom before clipping: +21dBu * Compressor threshold: -6dBu to +22dBu (variable) * Compressor ratio: 1:1 to 10:1 (variable) * Compressor attack time: 1 msec to 100 msec (adaptive) * Compressor release time: 0.1 sec to 3 sec (adaptive) * Nominal output levels: +4dBu/-10dBv * Output impedance: 75ohm * Output Level switch: 12dB attenuation * Noise Floor: -85dBu (typical, with ~40dB mic gain) * VU Meter: Analogue movement * Power supply: 115V / 230V ac mains, 50/60Hz * Power consumption: 30W * Mechanical: 482W x 88H x 220D (overall) * Weight: 3 kilos * High Pass Filter: 12dB per octave cut below 80Hz * EQ Boost & Cut: +/-15dB (zero phase-shift bell response) * LF Frequency : 40Hz to 650Hz variable * Mid Frequency : 300Hz to 5kHz variable * HMF Frequency : 1kHz to 6kHz variable * HF Frequency : 6kHz/12kHz switchable * EQ Q 0.9 (1.6 octaves)
Digital Output Specifications
* Sampling: 24 Bit * Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable * Output Formats: AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical * External Word Clock input: 75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronising)
Click here to visit the JoeMeek website |